MACRO PROGRAMS

[birkan66]

yanliş anlama benim için sorun degil niye dersen kitabı var ve onu kelime ve yazı ya cevirecek program larda var full iris ve fine reader gibi sonra gerisi bir kac dakıka  azıcıkta duzeltme sonra tezgaha kolay gelsin cam bilince fazla gerek te yok sanırım tezgah hafızası zaten yetersiz

[kaya029]

tşk arkadaşım paylaşımın gerçekten çok güzel

[Rüzgar ERDEM]

%
O9020(REFERANCE+TOLL CATCH)
#100=#4003
IF[#20EQ#0]GOTO200
N100IF[#20EQ#999]GOTO300
G91G28Z0
T#20M6
#999=#20
GOTO300
N200IF[#4120EQ#999]GOTO300
G91G28Z0
T#4120M6
#999=#4120
N300G#100
M99

%
wwwwwwwwwwwwwwwwwwwwwwww
%
O9913(SQUARE)
(G65P9913X-Y-U-V-H-M-A-)
#31=#4001
#33=#4003
#32=#5003
IF[#24EQ#0]GOTO10
GOTO20
N10#24=#5001
N20IF[#24EQ#0]GOTO30
GOTO40
N30#25=#5002
N40IF[[#11*#13]EQ0]GOTO990
IF[#1EQ#0]GOTO50
GOTO60
N50#1=0
N60#1=-#1
#12=FIX[#11]
#14=FIX[#13]
IF[[#11-#12]NE0]GOTO990
IF[[#13-#14]NE0]GOTO990
IF[#11GT1]GOTO70
GOTO80
N70IF[#21EQ#0]GOTO990
N80IF[#13GT1]GOTO90
GOTO100
N90IF[#22EQ#0]GOTO990
N100#100=1
WHILE[#100LE#11]DO1
#27=[#100-1]*#21
#28=0
X[#27*COS[#1]+#28*SIN[#1]+#24]Y[#28*COS[#1]-#27*SIN[#1]+#25]
#100=#100+1
END1
N200#100=2
WHILE[#100LE#13]DO1
#27=[#11-1]*#21
#28=[#100-1]*#22
X[#27*COS[#1]+#28*SIN[#1]+#24]Y[#28*COS[#1]-#27*SIN[#1]+#25]
#100=#100+1
END1
N300#100=#11-1
WHILE[#100GE1]DO1
#27=[#100-1]*#21
#28=[#13-1]*#22
X[#27*COS[#1]+#28*SIN[#1]+#24]Y[#28*COS[#1]-#27*SIN[#1]+#25]
#100=#100-1
END1
N400#100=#13-1
WHILE[#100GE2]DO1
#27=0
#28=[#100-1]*#22
X[#27*COS[#1]+#28*SIN[#1]+#24]Y[#28*COS[#1]-#27*SIN[#1]+#25]
#100=#100-1
END1
G#31G#33F#9
GOTO999
N990#3000=81(DATA-LACK-OR-ERROR-U.V.H.M)
N999M99
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
%
O9921(SQUARE-UNI-DIR)
(G65P9921X-Y-U-V-D-R-Z-F-E-C-K-Q-)
#31=#4001
#33=#4003
#32=#5003
IF[#24EQ#0]GOTO10
GOTO20
N10#24=#5001
N20IF[#25EQ#0]GOTO30
GOTO40
N30#25=#5002
N40IF[#18EQ#0]GOTO993(R)
IF[[#18-#26]LT0]GOTO993
IF[#26EQ#0]GOTO994(Z)
IF[[#7*#9*#21*#22]EQ0]GOTO990
IF[#21LT0]GOTO990
IF[#22LT0]GOTO990
#10=#[2200+#7]+#[2000+#7](OFFSET-B-TYPE&&OFFSET-NUMBER-LE-200)
IF[#10LE0]GOTO991
IF[#8EQ#0]GOTO50
GOTO60
N50#8=0.60
N60IF[#8GT1]GOTO996
IF[#3EQ#0]GOTO70
GOTO80
N70#3=#10
N80IF[#3LT0]GOTO992
IF[#6EQ#0]GOTO90
GOTO100
N90#6=0
N100#26=#26+#6
IF[#17EQ#0]GOTO110
GOTO120
N110#17=#18-#26
N120IF[#17GT[#18-#26]]GOTO997(Q-GT-[R-Z])
IF[#6GT#17]GOTO998(K-GT-Q)
#27=#24-[#3+#10]
#28=#25+#10*[2*#8-1]
#29=#18-#17
#30=#28
#14=2*#10*#8
DO1
#28=#30
G00X#27Y#28
Z#18
G01Z#29F[#9/2]
DO2
G01X[#21+#3+#10+#24]F#9
#12=#28+#10-#25
IF[#12GE#22]GOTO200
#28=#28+#14
G00Z#18
G00Z#32
G00Y#28X#27
G00Z#18
G01Z#29F[#9/2]
END2
N200#29=#29-#17
IF[#29GE#26]GOTO300
IF[[#29+#17]EQ#26]GOTO400
#29=#26
N300G00G90Z#18
Z#32
END1
N400(***END-OF-CYCLE***)
IF[#6EQ0]GOTO500
#26=#26-#6
G00G90Z#18
Z#32
#28=#30
G00G90X#27Y#28
Z#18
G01Z#26F[#9/2]
DO3
G01X[#21+#3+#10+#24]F#9
#12=#28+#10-#25
IF[#12GE#22]GOTO500
#28=#28+#14
G00Z#18
G00Z#32
G00Y#28X#27
G00Z#18
G01Z#26F[#9/2]
END3
N500(***END-OF-FINISH***)
G00G90Z#18
Z#32
G#31G#33F#9
GOTO999
N990#3000=81(DATA-LACK-OR-ERROR-D.F.U.V.)
N991#3000=82(OFFSET-ERROR)
N992#3000=83(DATA-ERROR-FOR-C.)
N993#3000=84(RAPID-APPROACH-POINT-R.)
N994#3000=85(Z-END-POINT-Z.)
N995#3000=86(CORNER-RADIUS-I.)
N996#3000=87(MODIFY-E.)
N997#3000=88(MODIFY-Q.)
N998#3000=89(MODIFY-K.)
N999M99




%
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
%
O9931(CIRCLE-OUTSIDE)
(G65P9931I-D-F-R-Z-C-M-X-Y-)
#31=#4001
#33=#4003
#32=#5003
IF[#24EQ#0]GOTO10
GOTO20
N10#24=#5001
N20IF[#25EQ#0]GOTO30
GOTO40
N30#25=#5002
N40IF[#18EQ#0]GOTO993(R)
IF[#26EQ#0]GOTO994(Z)
IF[[#4*#7*#9]EQ0]GOTO990
#10=#[2200+#7]+#[2000+#7](OFFSET-B-TYPE&&OFFSET-NUMBER-LE-200)
IF[#10LE0]GOTO991
IF[#3EQ#0]GOTO50
GOTO60
N50#3=#10*2
N60IF[#13EQ2]GOTO70
IF[#13EQ#0]GOTO70
(***UP-CUTTING***)
G00G90X[#24-[#4+#10]]Y[#25+#3]
Z#18
G01Z#26F[#9/2]
X[#24-[#4+#10]]Y#25F#9
G03I[#4+#10]
G01X[#24-[#4+#10]]Y[#25-#3]
GOTO80
(***DOWN-CUTTING***)
N70G00G90X[#24-[#4+#10]]Y[#25-#3]
Z#18
G01Z#26F[#9/2]
X[#24-[#4+#10]]Y#25F#9
G02I[#4+#10]
G01X[#24-[#4+#10]]Y[#25+#3]
(***END-OF-CYCLE***)
N80G00G90Z#18
Z#32
G#31G#33F#9
GOTO999
N990#3000=81(DATA-LACK-FOR-I.D.F.)
N991#3000=82(OFFSET-ERROR)
N992#3000=83(DATA-ERROR-FOR-C.)
N993#3000=84(RAPID-APPROACH-POINT-R.)
N994#3000=85(Z-END-POINT-Z.)
N999M99




%
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
%
O9934(SQUARE-INSIDE)
(G65P9934C-D-F-U-V-R-Z-I-S-M-X-Y-)
#31=#4001
#33=#4003
#32=#5003
IF[#24EQ#0]GOTO10
GOTO20
N10#24=#5001
N20IF[#25EQ#0]GOTO30
GOTO40
N30#25=#5002
N40IF[#18EQ#0]GOTO993
IF[#26EQ#0]GOTO994
IF[[#3*#7*#9*#21*#22]EQ0]GOTO990
#10=#[2200+#7]+#[2000+#7](OFFSET-B-TYPE&&OFFSET-NUMBER-LE-200)
IF[#10LE0]GOTO991
IF[#4EQ#0]GOTO50
GOTO60
N50#4=#10
N60IF[#10GT#4]GOTO995(D-GT-I)
IF[#10GT[#21/2]]GOTO991(D-GT-U/2)
IF[#10GT[#22/2]]GOTO991(D-GT-V/2)
IF[#10GT#3]GOTO992(D-GT-C)
IF[#3GT[#21/2]]GOTO992(C-GT-U/2)
IF[#3GT[#22/2]]GOTO992(C-GT-V/2)
IF[#19EQ#0]GOTO70
GOTO80
N70#19=3*#9
N80G00G90X#24Y#25
Z#18
G01Z#26F[#9/2]
IF[#13EQ3]GOTO90
IF[#13EQ#0]GOTO90
(***UP-CUTTING***)
G01X[#24+[#3-#10]]Y[#25-[[#22/2]-#3]]F#19
G02X#24Y[#25-[[#22/2]-#10]]R[#3-#10]F#9
G01X[#24-[[#21/2]-#10]]Y[#25-[[#22/2]-#10]],R[#4-#10]
X[#24-[[#21/2]-#10]]Y[#25+[[#22/2]-#10]],R[#4-#10]
X[#24+[[#21/2]-#10]]Y[#25+[[#22/2]-#10]],R[#4-#10]
X[#24+[[#21/2]-#10]]Y[#25-[[#22/2]-#10]],R[#4-#10]
X#24Y[#25-[[#22/2]-#10]]
G02X[#24-[#3-#10]]Y[#25-[[#22/2]-#3]]R[#3-#10]
G01X#24Y#25F#19
GOTO100
(***DOWN-CUTTING***)
N90G01X[#24-[#3-#10]]Y[#25-[[#22/2]-#3]]F#19
G03X#24Y[#25-[[#22/2]-#10]]R[#3-#10]F#9
G01X[#24+[[#21/2]-#10]]Y[#25-[[#22/2]-#10]],R[#4-#10]
X[#24+[[#21/2]-#10]]Y[#25+[[#22/2]-#10]],R[#4-#10]
X[#24-[[#21/2]-#10]]Y[#25+[[#22/2]-#10]],R[#4-#10]
X[#24-[[#21/2]-#10]]Y[#25-[[#22/2]-#10]],R[#4-#10]
X#24Y[#25-[[#22/2]-#10]]
G03X[#24+[#3-#10]]Y[#25-[[#22/2]-#3]]R[#3-#10]
G01X#24Y#25F#19
(***END-OF-CYCLE***)
N100G00G90Z#18
Z#32
G#31G#33F#9
GOTO999
N990#3000=81(DATA-LACK-FOR-C.D.F.U.V.)
N991#3000=82(OFFSET-ERROR)
N992#3000=83(DATA-ERROR-FOR-C.)
N993#3000=84(RAPID-APPROACH-POINT-R.)
N994#3000=85(Z-END-POINT-Z.)
N995#3000=86(CORNER-RADIUS-I.)
N999M99




%
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
%
O9941(CIRCLE POCKET)
(G65P9941X-Y-Z-R-H-I-D-F-Q-E-A-C-K-M-S-W620-T-)
#31=#4001
#33=#4003
#32=#5003
IF[#24EQ#0]GOTO10
GOTO20
N10#24=#5001
N20IF[#25EQ#0]GOTO30
GOTO40
N30#25=#5002
N40IF[#18EQ#0]GOTO993(R)
IF[#26EQ#0]GOTO994(Z)
IF[[#7*#9*#4]EQ0]GOTO990
#10=#[2200+#7]+#[2000+#7](OFFSET-B-TYPE&&OFFSET-NUMBER-LE-200)
IF[#10LE0]GOTO991
IF[#1EQ#0]GOTO50
GOTO60
N50#1=0
N60IF[#20EQ#0]GOTO70
GOTO80
N70#20=0
N80IF[#11EQ#0]GOTO989(NO-H.)
IF[#18LT#11]GOTO988(SEQUENCE-R.H.Z.)
IF[#18LT#26]GOTO988(SEQUENCE-R.H.Z.)
IF[#11LT#26]GOTO988(SEQUENCE-R.H.Z.)
IF[#10GT#4]GOTO991
IF[#3EQ#0]GOTO90
GOTO100
N90#3=0
N100IF[#8EQ#0]GOTO110
GOTO120
N110#8=0.60
N120IF[#6EQ#0]GOTO130
GOTO140
N130#6=0
N140IF[[2*#3+#10]GT[#4-#6-[#11-#26]*TAN[#1]]]GOTO992
IF[[#4-[#11-#26]*TAN[#1]]LT#10]GOTO985(A)
#26=#26+#6
#4=#4+#20*[1-COS[#1]]+#20*[1-SIN[#1]]*TAN[#1]
#4=#4-#6
#104=#4
IF[#17EQ#0]GOTO150
GOTO160
N150#17=#11-#26
N160IF[#17GT[#11-#26]]GOTO997(Q)
IF[#6GT#17]GOTO998(K)
IF[#8GT1]GOTO996(E)
IF[#19EQ#0]GOTO170
GOTO180
N170#19=#9/4
N180#29=#11-#17
DO1
#4=#104
(---A-NE-0---)
#4=#104
#30=#11-#29
#27=#30*TAN[#1]
#4=#4-#27
(---END---)
#12=2*#8*#10(SHARE)
#15=[#4-#10]/#12
#2=#15
#15=FIX[#15](COUNTER)
G00G90X#24Y#25
Z#18
G01Z[#29+#17]F[#9/2]
IF[#13EQ#0]GOTO201
GOTO202
N201#13=3
N202IF[#13EQ2]GOTO210
(***DOWN-CUTTING***)
G03I#3Z#29F#19
IF[#23EQ620]GOTO1000
#100=1
WHILE[#100LE#15]DO2
G01X[#24+[#100-1]*#12-0.5]F#9
X[#24+#100*#12]F[#9/2]
G03I-[#100*#12]
X[#24+#100*#12*COS[5]]Y[#25+#100*#12*SIN[5]]R[#100*#12]
G01X[#24+#100*#12-2]Y#25
#100=#100+1
END2
IF[[#2-#15]EQ0]GOTO220
N1000G01X[#24+[#4-#10]-2.5]F#9
X[#24+[#4-#10]]F[#9/2]
G03I-[#4-#10]F#9
X[#24+[#4-#10]*COS[5]]Y[#25+[#4-#10]*SIN[5]]R[#4-#10]
G01X[#24+[#4-#10]-2]Y#25
GOTO220
N210(***UP-CUTTING***)
G02I#3Z#29F#19
IF[#23EQ620]GOTO2000
#100=1
WHILE[#100LE#15]DO2
G01X[#24+[#100-1]*#12-0.5]F#9
X[#24+#100*#12]F[#9/2]
G02I-[#100*#12]
X[#24+#100*#12*COS[5]]Y[#25-#100*#12*SIN[5]]R[#100*#12]
G01X[#24+#100*#12-2]Y#25
#100=#100+1
END2
IF[[#2-#15]EQ0]GOTO220
N2000G01X[#24+[#4-#10]-2.5]F#9
X[#24+[#4-#10]]F[#9/2]
G02I-[#4-#10]
X[#24+[#4-#10]*COS[5]]Y[#25-[#4-#10]*SIN[5]]R[#4-#10]
G01X[#24+[#4-#10]-2]Y#25
N220
#29=#29-#17
IF[#29GE#26]GOTO300
IF[[#29+#17]EQ#26]GOTO400
#29=#26
N300G00G90Z#18
Z#32
END1
N400(***END-OF-CYCLE***)
G00G90Z#18
Z#32
G#31G#33F#9
GOTO999
N985#3000=92(BEVEL-A-TOO-BIG)
N988#3000=90(SEQUENCE-ERROR-R.H.Z.)
N989#3000=91(DATA-LACK-H.)
N990#3000=81(DATA-LACK-OR-ERROR-D.F.I.)
N991#3000=82(OFFSET-ERROR)
N992#3000=83(DATA-ERROR-FOR-C.)
N993#3000=84(RAPID-APPROACH-POINT-R.)
N994#3000=85(Z-END-POINT-Z.)
N995#3000=86(CORNER-RADIUS-I.)
N996#3000=87(MODIFY-E.)
N997#3000=88(MODIFY-Q.)
N998#3000=89(MODIFY-K.)
N999M99




%
wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww
%
O9943(TRACK-POCKET)
(G65P9943X-Y-Z-R-H-I-J-U-D-F-Q-E-C-K-M-S-)
#31=#4001
#33=#4003
#32=#5003
IF[#24EQ#0]GOTO10
GOTO20
N10#24=#5001
N20IF[#25EQ#0]GOTO30
GOTO40
N30#25=#5002
N40IF[#18EQ#0]GOTO993(R)
IF[#26EQ#0]GOTO994(Z)
IF[[#7*#9*#21*#4*#5]EQ0]GOTO990
#10=#[2200+#7]+#[2000+#7](OFFSET-B-TYPE&&OFFSET-NUMBER-LE-200)
IF[#10LE0]GOTO991
IF[#11EQ#0]GOTO989(NO-H.)
IF[#18LT#11]GOTO988(SEQUENCE-R.H.Z.)
IF[#18LT#26]GOTO988(SEQUENCE-R.H.Z.)
IF[#11LT#26]GOTO988(SEQUENCE-R.H.Z.)
IF[#10GT#4]GOTO991
IF[#10GT#5]GOTO991
IF[#3EQ#0]GOTO90
GOTO100
N90#3=0
N100IF[#8EQ#0]GOTO110
GOTO120
N110#8=0.60
N120IF[#6EQ#0]GOTO130
GOTO140
N130#6=0
N140IF[[2*#3+#10]GT[#4-#6]]GOTO992
#26=#26+#6
#4=#4-#6
#5=#5-#6
IF[#17EQ#0]GOTO150
GOTO160
N150#17=#11-#26
N160IF[#17GT[#11-#26]]GOTO997(Q)
IF[#6GT#17]GOTO998(K)
IF[#8GT1]GOTO996(E)
IF[#19EQ#0]GOTO170
GOTO180
N170#19=#9/4
N180#16=#11-#17
DO1
#12=2*#8*#10(LONG-AXIS-SHARE)
IF[#4LT#5]GOTO190
#15=[#4-#10]/#12
#2=#15
#14=[#5-#10]/#15(SHORT-AXIS-SHARE)
#15=FIX[#15](COUNTER)
GOTO200
N190#15=[#5-#10]/#12
#2=#15
#14=[#4-#10]/#15(SHORT-AXIS-SHARE)
#15=FIX[#15](COUNTER)
#101=#12
#12=#14
#14=#101
N200
G00G90X#24Y#25
Z#18
G01Z[#16+#17]F[#9/2]
IF[#13EQ#0]GOTO201
GOTO202
N201#13=3
N202IF[#13EQ2]GOTO210
(***DOWN-CUTTING***)
G03I#3Z#16F#19
G01X[#24+#21]F#9
#100=1
WHILE[#100LE#15]DO2
#104=#100*#12
#105=#100*#14
#22=SQRT[#21*#21-[#105-#104]*[#105-#104]]
#23=ATAN[#105-#104]/[#22](ANGLE)
#27=#104*SIN[#23](XA)
#28=#104*COS[#23](YA)
#29=#105*SIN[#23](XB)
#30=#105*COS[#23](YB)
G01X[#24+#21+#100*#14]F#9
G03X[#24+#21-#29]Y[#25+#30]I-#105
G01X[#24-#27]Y[#25+#28]
G03X[#24-#27]Y[#25-#28]I#27J-#28
G01X[#24+#21-#29]Y[#25-#30]
G03X[#24+#21+#100*#14]Y0I#29J#30
X[#24+#21+[#100*#14]*COS[5]]Y[#25+#100*#14*SIN[5]]R[#100*#14]
G01X[#24+#21+[#100*#14]-2]Y#25
#100=#100+1
END2
IF[[#2-#15]EQ0]GOTO220
#22=SQRT[#21*#21-[#5-#4]*[#5-#4]]
#23=ATAN[#5-#4]/[#22](ANGLE)
#27=[#4-#10]*SIN[#23](XA)
#28=[#4-#10]*COS[#23](YA)
#29=[#5-#10]*SIN[#23](XB)
#30=[#5-#10]*COS[#23](YB)
G01X[#24+#21+[#5-#10]]F#9
G03X[#24+#21-#29]Y[#25+#30]I-[#5-#10]
G01X[#24-#27]Y[#25+#28]
G03X[#24-#27]Y[#25-#28]I#27J-#28
G01X[#24+#21-#29]Y[#25-#30]
G03X[#24+#21+[#5-#10]]Y0I#29J#30
X[#24+#21+[#5-#10]*COS[5]]Y[#25+[#5-#10]*SIN[5]]R[#5-#10]
G01X[#24+#21+[#5-#10]-2]Y#25
GOTO220
N210(***UP-CUTTING***)
G02I#3Z#16F#19
#100=1
WHILE[#100LE#15]DO2
#104=#100*#12
#105=#100*#14
#22=SQRT[#21*#21-[#105-#104]*[#105-#104]]
#23=ATAN[#105-#104]/[#22](ANGLE)
#27=#104*SIN[#23](XA)
#28=#104*COS[#23](YA)
#29=#105*SIN[#23](XB)
#30=#105*COS[#23](YB)
G01X[#24+#21+#100*#14]F#9
G02X[#24+#21-#29]Y[#25-#30]I-#105
G01X[#24-#27]Y[#25-#28]
G02X[#24-#27]Y[#25+#28]I#27J#28
G01X[#24+#21-#29]Y[#25+#30]
G02X[#24+#21+#100*#14]Y0I#29J-#30
X[#24+#21+[#100*#14]*COS[5]]Y[#25-#100*#14*SIN[5]]R[#100*#14]
G01X[#24+#21+[#100*#14]-2]Y#25
#100=#100+1
END2
IF[[#2-#15]EQ0]GOTO220
#22=SQRT[#21*#21-[#5-#4]*[#5-#4]]
#23=ATAN[#5-#4]/[#22](ANGLE)
#27=[#4-#10]*SIN[#23](XA)
#28=[#4-#10]*COS[#23](YA)
#29=[#5-#10]*SIN[#23](XB)
#30=[#5-#10]*COS[#23](YB)
G01X[#24+#21+[#5-#10]]F#9
G02X[#24+#21-#29]Y[#25-#30]I-[#5-#10]
G01X[#24-#27]Y[#25-#28]
G02X[#24-#27]Y[#25+#28]I#27J#28
G01X[#24+#21-#29]Y[#25+#30]
G02X[#24+#21+[#5-#10]]Y0I#29J-#30
X[#24+#21+[#5-#10]*COS[5]]Y[#25-[#5-#10]*SIN[5]]R[#5-#10]
G01X[#24+#21+[#5-#10]-2]Y#25
N220
#16=#16-#17
IF[#16GE#26]GOTO300
IF[[#16+#17]EQ#26]GOTO400
#16=#26
N300G00G90Z#18
Z#32
END1
N400(***END-OF-CYCLE***)
G00G90Z#18
Z#32
G#31G#33F#9
GOTO999
N988#3000=90(SEQUENCE-ERROR-R.H.Z.)
N989#3000=91(DATA-LACK-H.)
N990#3000=81(DATA-LACK-FOR-D.F.I.J.U.)
N991#3000=82(OFFSET-ERROR)
N992#3000=83(DATA-ERROR-FOR-C.)
N993#3000=84(RAPID-APPROACH-POINT-R.)
N994#3000=85(Z-END-POINT-Z.)
N995#3000=86(CORNER-RADIUS-I.)
N996#3000=87(MODIFY-E.)
N997#3000=88(MODIFY-Q.)
N998#3000=89(MODIFY-K.)
N999M99



%
arkadaslar çağrı komutlarının anlamlarını ve resımlerını bilgisayara atamadım tarama işlemini hallettıkten sonra (custom macro programıng manuel kıtabını kardeslerimin hizmetine sunacagım sevgilerle)

[Ramazan Çiftçi]

Teşekürler emeğine sağlık

[crisis]

teşekkürler

[sinan]

ARKADAŞLAR BUYRUN BIR KAC MACRODA BENDEN.SU ANDA TEZGAHIMDA COGU CALISMAKTADIR.HERKESE KOLAY GELSİN.
İNDİRME ŞİFRESİ: turkeycnc

http://www.megashare.com/565235

arkadaşlar bu mokro işini yazmayı değilde kullanmayı az anlatsanız benim anladığım şu 9022 numaralı proğramı örnek 9022 tezgaha atıyrum artık onu g65 le çagırarak kullanıyorum doğrumu anlamışım tşk emeginiz için

[birkan66]

eilne saglık yalnız burada ofset sayfasına gore bazı yerleri duzeltmen gerkebilir orasını hatırlatayım